Estimated Costs

• Standard Outlet Replacement

  $75-$125.

  Estimated $75-$125. Replace an existing standard outlet at a suitable existing box and circuit. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• GFCI Outlet Replacement

  $90-$150.

  Estimated $90-$150. Replace an existing GFCI outlet. Verify suitable existing box and circuit. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• New Standard Outlet - Short Circuit Extension

  $150-$300.

  Estimated $150-$300. Add a new outlet with a short accessible extension from a suitable existing circuit. New dedicated circuits are separate. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• New GFCI-Protected Outlet

  $175-$325.

  Estimated $175-$325. Add a new GFCI-protected outlet with short accessible wiring from a suitable existing circuit. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• Standard Switch Replacement

  $75-$125.

  Estimated $75-$125. Replace an existing standard switch with compatible wiring and box. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• New Switch and Wiring

  $150-$300.

  Estimated $150-$300. Add a new switch location with short accessible wiring to a suitable existing circuit. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• Standard Light Fixture Replacement

  $85-$150.

  Estimated $85-$150. Replace an existing standard fixture at normal ceiling height with a suitable existing box and wiring. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• New Light Point with Box and Wiring

  $250-$450.

  Estimated $250-$450. Add a new light point with box and accessible wiring. Ceiling or wall repairs and difficult access are separate. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• Ceiling Fan Installation - Existing Point, 8 to 10 ft

  $125-$200.

  Estimated $125-$200. Customer-supplied standard fan at an existing fan-rated box and suitable wiring, with ceiling approximately 8-10 feet. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• Ceiling Fan Installation - High Ceiling or Complex

  $200-$350+

  Estimated $200-$350+. Existing suitable fan-rated point. Higher ceilings, difficult assembly, access and extra personnel affect the final quote. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• Standard Branch Breaker Replacement

  $100-$175.

  Estimated $100-$175. Replace a compatible standard branch breaker in a serviceable panel. Breaker device is separate. Main breaker, damaged bus, panel upgrade and fault diagnosis are not included. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• New 120V Dedicated Circuit

  $300-$650.

  Estimated $300-$650. Labor for a new 120V dedicated circuit. Route length, finished surfaces, access, load and panel capacity must be reviewed. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• New 240V Dedicated Circuit

  $450-$1,000+

  Estimated $450-$1,000+. Labor for a new 240V dedicated circuit. Route, equipment requirements, access and panel capacity determine final price. Do not double-charge wiring included in an EV charger installation package. Labor only. Devices, fixtures, breakers, wire, materials and permit fees are excluded unless expressly included in the final quote.

• EV Charger Installation - Short Standard Run

  $600-$1,500.

  Estimated $600-$1,500. Routine short-run installation labor and circuit materials included, subject to site and electrical-capacity review. Charger, permits, panel upgrades, excavation and surface restoration excluded. Do not add a second charge for the same included circuit. This is an installation estimate, not the separate $75 assessment visit.

• TV Mounting - Up to 65 inches

  $100-$150

  Estimated $100-$150 per TV. Standard installation on a suitable accessible wall with customer-supplied TV and compatible mount. Mount, in-wall wiring, electrical work, masonry, fireplace mounting and unusual access are quoted separately.

• TV Mounting - 66 to 85 inches

  $150-$225

  Estimated $150-$225 per TV. Standard accessible wall mounting with customer-supplied TV and compatible bracket. Fireplace, masonry, concealed wiring, extra personnel and unusual access are quoted separately.

• Soundbar Mounting - With TV Installation

  $40-$75

  Estimated $40-$75 per soundbar. Add-on during the same TV installation visit. Customer supplies soundbar and compatible bracket. Concealed wiring, electrical work and standalone soundbar visits require a separate quote.

• TV Cable Concealment - Surface Raceway

  $50-$100

  Estimated $50-$100 per TV add-on. Accessible surface raceway with a TV installation; labor only, raceway and cables extra. Standalone visit minimum $100.

• TV Low-Voltage Cable Concealment - Same Stud Bay

  $95-$175

  Estimated $95-$175 per TV add-on. Route signal cables in an accessible hollow wall within one stud bay. No mains power cord inside walls. Electrical outlet work, blocking, masonry and wall repair separate.

• Home Theater Setup - Existing Wiring

  $300-$600

  Estimated $300-$600 per room. Set up up to 5 speakers, subwoofer, receiver and display using existing suitable wiring and power. Equipment, concealed wiring, acoustic treatment and construction separate.

• Custom TV & Media Wall Design

  Project-specific quote

  Share photos, wall dimensions and your ideas for a tailored estimate. Design, finishes, equipment and installation scope are confirmed before scheduling.

• Picture or Artwork Hanging - Standard

  $30-$60

  Estimated $30-$60 per item; $100 minimum visit labor total. Standard accessible artwork hanging with suitable fixing points. The total hanging labor for the visit must be at least $100. This minimum is not an additional assessment fee. Numan adjusts the quote to meet the minimum before approval. Gallery layouts, oversized or unusually heavy artwork are quoted separately.

• Small Lightweight Mirror Hanging

  $50-$90

  Estimated $50-$90 per mirror. Lightweight mirror with simple accessible mounting. Customer supplies mirror. Final price depends on actual dimensions, weight, wall construction and access.

• Medium Mirror Hanging

  $90-$150

  Estimated $90-$150 per mirror. Mirror size, weight and mounting hardware determine scope. Customer supplies mirror. Final price depends on actual dimensions, weight, wall construction and access.

• Large or Heavy Mirror Hanging

  $150-$250+

  Estimated $150-$250+ per mirror. Heavy or oversized mirror. Second installer, stairs, high access and specialized fixing may increase the quote. Customer supplies mirror. Final price depends on actual dimensions, weight, wall construction and access.

Standard blinds and shades: 1 = $100; 2 = $150 total; add $75 each for units 3–10, then $50 each from unit 11. For example, 10 = $750 and 11 = $800. Customer-supplied, correctly sized units at the same visit.

• Blinds or Shades - 1 Unit Package

  $100

  Estimated $100 package starting price. One package covers 1 standard customer-supplied, correctly sized blinds or shades at the same visit. Select this package once, not once per blind. Custom cutting, motorization, oversized units, difficult surfaces and high access are quoted separately.

• Blinds or Shades - 2 Units Package

  $150

  Estimated $150 package starting price. One package covers 2 standard customer-supplied, correctly sized blinds or shades at the same visit. Select this package once, not once per blind. Custom cutting, motorization, oversized units, difficult surfaces and high access are quoted separately.

• Blinds or Shades - 10 Units Package

  $750

  Estimated $750 package starting price. One package covers 10 standard customer-supplied, correctly sized blinds or shades at the same visit. Select this package once, not once per blind. Custom cutting, motorization, oversized units, difficult surfaces and high access are quoted separately.

• Blinds or Shades - Additional Units After 10

  $50

  Estimated $50 per additional unit. Use only with the 10-unit package ($750). Quantity equals units above 10. Example: 11 total units = $750 + $50 = $800. Standard customer-supplied units during the same visit. Special conditions are quoted separately.

• Curtain Rod and Curtains - 1 to 5 Openings

  $100

  Estimated from $100 per opening. Standard customer-supplied curtain rod and curtain installation. Quantity is the number of openings, from 1 to 5. For 6 or more standard openings at the same visit use the volume-rate service instead. Heavy/custom drapery, tracks, high ceilings and specialty surfaces are separate.

• Curtain Rod and Curtains - 6 or More Openings

  $75

  Estimated from $75 per opening, minimum 6 openings. Volume rate applies to ALL standard openings when installing 6 or more during the same visit. Quantity must be at least 6. Do not combine with the 1-to-5-opening rate. Six standard openings start at $450 total. Customer supplies rods and curtains. Specialty drapery and unusual conditions are separate.

• Drapery and Track Installation

  $120-$250

  Estimated $120-$250 per opening starting range. Customer-supplied drapery, rod or track. Fabric weight, panel count, pleats, fullness, finishing, wall type and height affect price. Projects above 5 openings receive a reviewed volume quote; the standard-curtain $75 rate does not automatically apply.

• Interior Shutter Installation

  $125-$225

  Estimated $125-$225 per opening. Install a customer-supplied correctly measured shutter assembly in a suitable opening. Custom fabrication, resizing, damaged jambs and unusual height separate. Multi-opening price confirmed from photos.

• Exterior Decorative Shutter Installation

  $100-$175

  Estimated $100-$175 per pair. Mount one customer-supplied decorative pair at an accessible first-floor window. Material, masonry, rot repair, tall ladder/lift access and functional storm shutters separate.

• Wireless Security Camera Mounting and Setup

  $100-$150

  Estimated $100-$150 per camera. Customer-supplied battery or plug-in camera at accessible height with suitable existing power/Wi-Fi. New outlets, solar equipment and wiring separate.

• PoE Camera Installation - Existing Cable

  $100-$175

  Estimated $100-$175 per camera. Mount and configure a customer-supplied PoE camera on an existing tested cable with compatible recorder or network. No new cable run included.

• PoE Camera Installation - New Accessible Cable Run

  $200-$325

  Estimated $200-$325 per camera. Mount and configure camera with one routine cable route up to 75 feet, termination and testing. Customer supplies camera/recorder; cable and hardware extra. Trenching, masonry and high access separate. Do not add a second Ethernet-run charge for the same labor.

• Video Doorbell Installation - Existing Wiring

  $100-$175

  Estimated $100-$175 per doorbell. Install customer-supplied compatible video doorbell using functional existing low-voltage wiring and transformer. New wiring, transformer upgrade and masonry work separate.

• NVR Setup and Remote Viewing - Up to 8 Cameras

  $125-$250

  Estimated $125-$250 per system. Configure customer-supplied recorder, storage settings and authorized mobile viewing for up to eight connected compatible cameras. Equipment, subscriptions and new wiring excluded. No alarm-monitoring contract included.

• Router and Wi-Fi Setup

  $100-$175

  Estimated $100-$175 per router. Set up one customer-supplied router, secure Wi-Fi settings and test existing internet connection. ISP repairs, equipment and new wiring separate.

• Mesh Wi-Fi Setup - Up to 3 Nodes

  $150-$250

  Estimated $150-$250 per system. Configure up to three customer-supplied mesh nodes and optimize placement using existing power and connectivity. Ethernet backhaul installation separate.

• Ethernet Cable Run - Accessible Route

  $150-$250

  Estimated $150-$250 per run. One Cat6 run up to 75 feet over a routine accessible attic or crawlspace route, termination and basic testing. Cable and hardware extra. No trenching, masonry drilling or surface restoration. Photos and route confirmation required.

• Small Network Rack and Equipment Setup

  $250-$500

  Estimated $250-$500 per rack. Mount a customer-supplied small wall rack and organize up to 12 existing cable connections with basic switch/router setup. Rack, equipment, structural blocking and new cable runs extra.

• Wall Shelf Installation

  $50-$100

  Estimated $50-$100 per shelf. One customer-supplied shelf up to 48 inches with suitable brackets and accessible framing. Heavy floating shelves, masonry and fabrication separate. Minimum job labor $100.

• Garage Wall-Mounted Storage Rack Installation

  $100-$200

  Estimated $100-$200 per rack. Assemble and secure one customer-supplied rack into suitable framing at accessible height. Rack, structural modification and unusually heavy systems separate.

• Overhead Garage Storage Rack - Up to 4 x 8 Feet

  $175-$300

  Estimated $175-$300 per rack. Install one customer-supplied fixed overhead rack into suitable ceiling framing up to 10 feet. Confirm manufacturer clearances and loading requirements. Lift systems, structural reinforcement and taller ceilings separate.

• Closet Organizer Installation - Standard Reach-In

  $200-$450

  Estimated $200-$450 per closet. Assemble and secure a customer-supplied modular organizer in a reach-in closet up to 8 feet wide. Demolition, wall repair, electrical and custom carpentry separate.

• Garage Storage Cabinet Assembly and Anchoring

  $150-$300

  Estimated $150-$300 per cabinet. Assemble and anchor one customer-supplied standard storage cabinet. Multiple cabinets, worktops, oversized units and wall reinforcement priced separately.

• Standard Desk Assembly

  $75-$125

  Estimated $75-$125 per item. Customer supplies complete product, instructions and manufacturer hardware. Model, part count, size, wall anchoring, stairs, extra personnel and packaging removal are reviewed before the final quote. Low per-item rates apply to combined visits, not a guaranteed standalone visit price. Modular/custom wardrobes and commercial fitness systems require a separate project quote.

• Dresser Assembly

  $100-$225

  Estimated $100-$225 per item. Customer supplies complete product, instructions and manufacturer hardware. Model, part count, size, wall anchoring, stairs, extra personnel and packaging removal are reviewed before the final quote. Low per-item rates apply to combined visits, not a guaranteed standalone visit price. Modular/custom wardrobes and commercial fitness systems require a separate project quote.

• Standard Bed Frame Assembly

  $100-$175

  Estimated $100-$175 per item. Customer supplies complete product, instructions and manufacturer hardware. Model, part count, size, wall anchoring, stairs, extra personnel and packaging removal are reviewed before the final quote. Low per-item rates apply to combined visits, not a guaranteed standalone visit price. Modular/custom wardrobes and commercial fitness systems require a separate project quote.

• Bunk or Loft Bed Assembly

  $175-$300

  Estimated $175-$300 per item. Customer supplies complete product, instructions and manufacturer hardware. Model, part count, size, wall anchoring, stairs, extra personnel and packaging removal are reviewed before the final quote. Low per-item rates apply to combined visits, not a guaranteed standalone visit price. Modular/custom wardrobes and commercial fitness systems require a separate project quote.

• Dining Table and 4 to 6 Chairs Assembly

  $125-$225

  Estimated $125-$225 per set. Customer supplies complete product, instructions and manufacturer hardware. Model, part count, size, wall anchoring, stairs, extra personnel and packaging removal are reviewed before the final quote. Low per-item rates apply to combined visits, not a guaranteed standalone visit price. Modular/custom wardrobes and commercial fitness systems require a separate project quote.

• Treadmill Assembly

  $125-$225

  Estimated $125-$225 per item. Customer supplies complete product, instructions and manufacturer hardware. Model, part count, size, wall anchoring, stairs, extra personnel and packaging removal are reviewed before the final quote. Low per-item rates apply to combined visits, not a guaranteed standalone visit price. Modular/custom wardrobes and commercial fitness systems require a separate project quote.

• Exercise Bike Assembly

  $100-$175

  Estimated $100-$175 per item. Customer supplies complete product, instructions and manufacturer hardware. Model, part count, size, wall anchoring, stairs, extra personnel and packaging removal are reviewed before the final quote. Low per-item rates apply to combined visits, not a guaranteed standalone visit price. Modular/custom wardrobes and commercial fitness systems require a separate project quote.

• Multi-Gym Assembly

  $200-$500+

  Estimated $200-$500+ per item. Customer supplies complete product, instructions and manufacturer hardware. Model, part count, size, wall anchoring, stairs, extra personnel and packaging removal are reviewed before the final quote. Low per-item rates apply to combined visits, not a guaranteed standalone visit price. Modular/custom wardrobes and commercial fitness systems require a separate project quote.

• Interior Door Adjustment and Minor Repair

  $100-$175

  Estimated $100-$175 per door. Adjust accessible hinges/strike and minor alignment issues. New slab, frame replacement, substantial planing and painting separate.

• Interior Door Slab Replacement

  $150-$250

  Estimated $150-$250 per door. Fit a customer-supplied matching slab to a sound existing frame. Standard hinge and latch fitting included. Major resizing, custom joinery, hardware and finishing separate.

• Interior Prehung Door Installation

  $225-$400

  Estimated $225-$400 per opening. Replace a standard interior prehung unit in a sound matching rough opening. Door unit, trim, paint, haul-off and structural changes separate.

• Smart Lock Installation and Setup

  $100-$175

  Estimated $100-$175 per lock. Customer-supplied compatible lock in existing preparation, basic app setup and testing. Door alignment repair, new drilling, hubs and subscriptions separate.

• Baseboard Installation

  $4-$7

  Estimated $4-$7 per linear foot. Labor for standard customer-supplied paint-grade baseboard on suitable walls. Minimum project labor $200. Demolition, material, caulk/paint, complex profiles and uneven walls separate.

• Preassembled Cabinet Installation

  $150-$300

  Estimated $150-$300 per cabinet. Set, level and secure a customer-supplied standard cabinet to suitable framing. Minimum project labor $300. Assembly, countertops, plumbing, electrical, demolition and trim/fillers separate.

• Minor Cabinet Door or Drawer Repair

  $100-$200

  Estimated $100-$200 labor per cabinet door or drawer for a limited minor repair. Replacement components, extensive rebuilding, structural damage and full refinishing excluded; photos required to confirm repairability. Estimated labor only; parts and materials are separate. $100 minimum TOTAL installation/repair labor per visit, applied once across combined items, not per item. Numan confirms scope and final price before scheduling; not a fixed quote or maximum.

• Interior Room Painting - Walls Only

  $300-$600

  Estimated $300-$600 per standard room. Labor for walls in a room up to 12 x 12 feet and 9-foot ceiling, two coats with minor prep. Paint/materials, ceiling, trim, extensive repairs and major color changes separate.

• Exterior Siding Painting

  $1.5-$3

  Estimated $1.5-$3 per square foot of paintable surface. Preliminary labor allowance for accessible sound siding; measure actual paintable wall surface, not home floor area. Minimum project labor $750. Paint, pressure washing, rot repair, major scraping, high access and trim separate. Photos and scope confirmation required.

• Small Drywall Patch - Up to 6 Inches

  $100-$175

  Estimated $100-$175 per patch. Patch, tape/compound and sand one small accessible wall hole to a paint-ready finish. Minimum project labor $150. Paint, hidden damage, texture matching and materials separate.

• Medium Drywall Patch - Up to 16 x 16 Inches

  $175-$325

  Estimated $175-$325 per patch. Replace a medium damaged wall area with necessary backing, tape/compound and sand. Materials, paint, leak repair and specialty texture separate. Drying may require another visit included in the final scope.

• Drywall Installation and Finishing

  $2-$4

  Estimated $2-$4 per square foot of board surface. Labor to hang and finish standard drywall on accessible prepared framing. Minimum project labor $500. Board/materials, insulation, framing, demolition, paint and specialty textures separate. Ceilings and occupied rooms may cost more.

• Click-Lock LVP or Laminate Installation

  $2-$4

  Estimated $2-$4 per square foot. Labor for a standard floating floor over a clean, flat, suitable prepared subfloor. Minimum project labor $500. Flooring/materials, demolition, leveling, trim, stairs and furniture moving separate.

• Engineered Wood Floor Installation

  $3-$6

  Estimated $3-$6 per square foot. Preliminary labor for compatible engineered flooring on a prepared subfloor. Minimum project labor $750. Material, glue, moisture remediation, leveling, demolition, stairs and finishing separate; method confirmed before quote.

• Standard Floor Tile Installation

  $6-$12

  Estimated $6-$12 per square foot. Preliminary labor for standard-format floor tile on a suitable prepared surface. Minimum project labor $750. Tile, setting materials, underlayment, waterproofing, demolition, leveling and intricate layouts separate.

• Localized LVP or Laminate Plank Repair

  $150-$350

  Estimated $150-$350 per repair area. Replace up to three accessible damaged planks using customer-supplied matching material. Large disassembly, glued floor, subfloor damage and unavailable matching stock separate.